FS-Curtis
More than 150 years ago, the FS-Curtis way of doing business was established through two key commitments: a dedication to building quality products and a dedication to responsive customer service. Over the decades, the company and its products have evolved through innovation and new technologies. Today, just as in 1854, customers can depend on FS-Curtis products for reliable, long-term service.
Rotary Screw Air Compressors
The NX Series is our latest and advanced generation of variable & fixed speed air compressors. The NX’s quiet operation is ideal for a wide variety of applications.
- Leak-free design with long last piping and O-ring seals
- Washable cabinet pre-filtration panels
- Powder-coat painted enclosure
- Spin-on oil filter and air/oil separator
- Air cooled oil cooler & aftercooler
- Vibration isolators
- 120 gallon tank (18-22kW)
- Washable cabinet pre-filtration panels
- Variable Speed Drive
- Ultrapack - includes high efficiency dryer and filter
Performing dependably in thousands of locations worldwide, RS Series compressors combine efficient operation with outstanding durability in the most demanding environments.
- Heavy duty intake filter
- NEMA premium efficiency motors (Up to 200hp)
- 120V control voltage
- Multi-Stage oil separation system
- Rigid base with forklift slots
- Multi-Level safety systems
- Factory filled synthetic oil
- VFD
- Water cooled
- TEFC motors
- NEMA 4 Control Panel
- Y/D starter (standard for 125-300 HP)
- Solid-State Soft Starter
- Moisture separator and drain trap
- Alternative voltages
Designed and built from the ground up to provide maximum performance and energy savings, the GSV Series features FS-Curtis exclusive DemandSmart Energy Management System.
- Direct drive system
- Leak-free design with stainless steel hoses and O-ring seals
- Exceptionally quiet centrifugal fan
- Washable cabinet pre-filter panels
- Advanced oil separation system
- Frost protection to +32 F
- AIMS Plus controller
- Integrated refrigerated dryer with dryer bypass system
- Moisture separator
- Zero-air-loss drains
- Food-grade lubricant
The AF Series compressors are designed, built and tested in the USA. FS-Curtis has built more than 150 years of American heritage into the AF product line.
- Automatic Flow™ variable frequency speed control
- 115V control voltage
- Low loss drive system
- Easy key pad control (AF108 – AF140)
- Multi-stage oil separation system
- Side-by-side oil/air cooler
- Rigid base with forklift slots
- Quiet Enclosure
- Water Cooled
- Alternative Voltages (200, 230, 575V, 60Hz)
Recip/Air Compressors
For automotive, light industrial and other challenging applications, CA Series compressors are built to last. Components are selected based on durability and performance.
- Available in Simplex or Duplex units
- Splash lubricated
- ASME air receiver (Vertical or Horizontal)
- UL Approved pressure switch
- Slow v-belt drive
- Factory filled lubricant
- Automatic start-stop control
- Manual condensate tank drain valve
- Simplex
- Duplex
- Gas Driven
- Ultra Pack
These reciprocating compressors combine our signature performance and reliability with a simple industrial design, making them the most rugged and affordable compressors in their category.
- Splash lubricated system
- Horizontal ASME air receiver
- Slow v-belt drive
- Premium efficiency motors (3 phase 1 HP and up only)
- Dial read-out pressure gauge indicator
- Factory filled lubricant
- Simplex
- Magnetic motor starter
- Loadless starting
- Metal intake filter/silencer
- Gas Driven
- Slow speed design for extended life
- 12 DC starter with alternator
- Engine idle control
Gas-driven models are ideal for applications that require air when electricity isn't readily available. FS-Curtis gas-driven models are perfect for fleet and service applications.
- 13 & 14 HP
- Splash lubricated
- Slow v-belt drive
- Oil level sight indicator
- Dial read-out pressure gauge indicator
- Factory filled lubricant
- Options of a Kohler or Honda engine
- OSHA-approved totally enclosed metal belt guard
- Engine idle control
CW series large industrial single and two-stage compressors deliver the performance you need to get the job done. Models range from 30 to 250psi.
- Automatic start and stop (must specify pressure)
- Splash lubricated
- V-belt drive with multi-groove flywheel
- OSHA approved enclosed belt guard
- Slow v-belt drive
- Robust cast iron crankcase
- Intercooler with radiating fins
- Premium Efficiency ODP Motors
- Unsurpassed reliability
- Low speed compressor pumps and electric motors
- Long, extended service life
- Low maintenance
The perfect combination of quality components and efficient design make the ML Series rugged, affordable and smart. Every model is built tough to last a lifetime in demanding working conditions.
- Centro-Ring Pressure lubrication
- Factory filled oil
- Magnetic motor starter (60Hz)
- Manual condensate tank drain valve
- Dynamically balanced flywheel
- Simplex
- Duplex
- Ultra Pack
Climate Control Compressors provide clean, dry air for instrument control equipment. Ranging from 1/3 to 25 HP, all units are factory set at 80 PSIG to deliver the CFM you desire.
- 0.5 - 7.5 HP
- UL approved pressure switch
- Slow v-belt drive
- Premium efficiency motors (3 phase 1 HP and up only)
- Pressure switch (0.5 and 1 HP)
- Magnetic starter (2 HP and up)
- Simplex
- Duplex
Non-Cycling Refrigerated Compressed Air Dryers
RNP (10-500 SCFM)
- Simple and reliable copper tube-on-tube heat exchanger for RNP10-50
- Stainless-steel brazed plate heat exchanger for RNP75-500
- At-a-glance dew point indicator for quick performance verification on RNP200-500
- Handles high inlet temperatures up to 180F
- Single air-treatment station is easy for installation, operation and maintenance
- Integrated 3-micron separator removes solid contaminants and oil aerosols
- Stainless-steel brazed plate heat exchanger optimizes the thermal efficiency and saves money by reducing pressure drop
- Integrated 3-micron separator and optional 0.0008 ppm oil removal filter
- Options are available to fit your applications
Energy Saving Refrigerated Dryer
- Hermetically sealed refrigerant compressor with enviromentally friendly R-134a refrigerant for high reliability and long service life
- Standard at-a-clange controller for simple operation, or optional DemandSmart energy management system for energy-saving results
- Optimized cabinet design promotes ease of access from all four sides
- Handles high inlet temperatures up to 180F
- Single air-treatment station is easy for installation, operation and maintenance
- Integrated 3-micron separator removes solid contaminants and oil aerosols
- Digital scroll refrigerant compressor with enviromentally friendly R-404a refrigerant for high reliability, long service life and quiet working enviroment
- No-air-loss condensate drain prevents energy loss
- Multi-station design for easy movement and precise match of demand
Desiccant Compressed Air Dryers
DLW desiccant air dryers protect air systems exposed to temperatures below freezing. The fully enclosed wall-mounted package delivers dew points of ISO 8573.1 Class 1 and Class 2 with flow rates of 7 to 50 SCFM.
FS-Curtis DL heatless desiccant dryers deliver consistent outlet pressure dew points to -100 ̊F. By combining the proven benefits of desiccant drying technology with the industry leading design, FS-Curtis’ DL dryers provide the most reliable compressed air drying system for various applications.
FS-Curtis’ externally heated purge desiccant dryers offer consistent dew point performance and are equipped with our advanced purge booster. DHP Series dryers consume less dried compressed air volume for regeneration purpose by the use of a low-watt density heater.
DLW desiccant air dryers protect air systems exposed to temperatures below freezing. The fully enclosed wall-mounted package delivers dew points of ISO 8573.1 Class 1 and Class 2 with flow rates of 7 to 50 SCFM. Enclosed design with clean, streamlined piping for easy installation and quiet operation
Air Filtration
- Low Pressure drop delivers energy savings
- Piston-type element to housing seal keeps unfiltered air from bypassing the element
- Corrosion-resistant cores
- Coated, closed-cell foam sleeve resists chemical corrosion from oils and acids
- High dust-loading capacity
- Three filtration techniques maximize cartridge life
- Removes solid particles one micron and larger
- Long-life mist eliminator lasts 8 to 15 years
- 0.5 to 1 psi pressure drop reduces energy consumption
- Dedicated vent port for demand-type drains
- Heavy-duty ASME pressure vessel